What are the connection methods for alumina ceramic rollers?

Ceramic roller, as the name suggests, is a roller made of ceramic material. We are probably no strangers to ceramics. There are many varieties of ceramic thieves, and with our development, the types of ceramics have gradually become more diverse, and they are made into various items for use in various fields. Ceramic rollers are one of them used in industry. Ceramic rods usually need to be connected, but the way of connection makes many people curious. What are the connection methods for alumina ceramic roller rods?

1. Cut off the pipe

It is necessary to cut the pipe according to the required length first, and then when we are cutting the pipe, we should be careful not to exert too much force. Otherwise, it may cause the ceramic liquid pipe to open and lose its shape; The next step is to remove the plants. When the pipe stops cutting and covering, it is necessary to remove the pickled plants, otherwise the gasket will be cut.

2. Marking

Regarding this, we need to pull the ceramic roller rod tube out of the fitting socket and expect to press it together. In order for the iron oxide ceramic pipe to be completely pulled out of the fitting socket, at some point, it is necessary to draw a line at the end of the pipe to mark the stop of the pulling length; Next, the cushion should be accurately installed in the groove of our ceramic riser. What are the connection methods for alumina ceramic rollers?

3. Crimping and inspection

When crimping, pay attention to the concave position of the pipe fittings and place them in the concave groove of the sandalwood. As for the clamp and the pipe axis, they must be perpendicular. After implementing the following method, we need to pay attention to the use of a common gauge to check the size of our crimping.